What to do if the splicing machine is not tightly spliced during use

The main purpose of using a splicing machine is to splice plates and provide assistance for plate processing. If not possible, there may be problems that can undoubtedly become a burden, such as incomplete splicing. At this time, it is necessary to stop the machine for inspection and adjust it properly before continuing to work.

When using the splicing machine, it is required that the edges of the board be treated smoothly before continuing the splicing. Check if the clamping force is sufficient, and if not, increase the clamping force; Check if the panel clamp is damaged or deformed. If there is any deformation, it needs to be replaced and cannot be used again. Another thing to note is whether the position of the splicing machine is reasonable. It is usually installed in the appropriate position at the beginning of installation. If there is a deviation due to work, check whether the position is reasonable and adjust it to the initial installation if it is unreasonable.

The quality of the board can be affected by the lack of precision in the splicing machine. Based on the above inspection items, check each aspect one by one to see which one is the problem, and solve it to successfully complete the work.