What should I do if the output of the jigsaw is stagnant

In the production of wood panels, the jigsaw is an important woodworking machine. If the output stops suddenly in the production, the equipment will be damaged seriously, and the normal production efficiency will be affected.

If the output of the splicing machine is stagnant, first check whether there is a problem in the control box caused by the poor connection of the lower line. The control box can be said to be the key to the normal operation of the whole equipment. If there is a problem in the background, it will be directly reflected in the operation. Check the connection between the control box and the distribution board.

Basically, the early stage of failure is the process of inspection. Check whether each signal line is loose or disconnected. It may also be caused by the interruption caused by the carelessness of the staff during the operation. Eliminate the failure one by one, and find the problem to solve the problem. It is convenient to complete the equipment maintenance quickly, improve the production efficiency, and reduce the cost loss.