Maintenance tips of panel collator

When we use the collage machine in our daily life, it is easy to have some troubles which will affect the production efficiency. Is there any way for us to deal with the problems of the jigsaw? Today, the editor will list a series of common small faults of the collage machine and teach you solutions. No, my name is Lei Feng.

The common faults of panel collator are as follows:

One Plate ignition refers to the discharge of plate caused by short circuit or overcurrent. The solution is to find out the cause of ignition first. In general, a few common situations are that too much glue is applied to the upper and lower plates, or the wood has serious knots. After finding the cause, the ignition place can be polished smoothly. In another case, there may be metal objects in the wood that cause short circuit between the upper and lower plates , the situation of ignition will be serious, and the electrode plate may be penetrated. The penetrated part shall be repaired with stainless steel electrode and then polished.

2. Over current, basically due to the improper use and adjustment of the customer and the mismatch between anode and grid current, the user manufacturer makes the operator generally accept the professional training of the high-frequency manufacturer for a more skilled electrician, and after the panel thickness is changed, the high-frequency must be readjusted. In addition, if the operator is changed frequently, it will cause various troubles because the new operator is not familiar with it.

3 some small parts manufacturers will give away some for free when delivering goods, or discuss with manufacturers to prepare some vulnerable parts so as not to delay the production cycle due to equipment waiting due to remote roads.

Do you understand the above problems and solutions of the collator? This site is updated regularly. My favorite friend will see you next week.