How to clean the main parts of the hot press

The use environment of the hot press also causes it to need fixed cleaning. A large number of plates need to be dried by hot pressing every day. After a long time, there will be some plate debris on it. If it is not cleaned in time, its normal operation will be affected. The daily cleaning is more about the cleaning of its main components.

Check whether the heat transfer oil delivered by the pipeline of the hot press is unblocked, and it can operate normally only if it is kept unblocked. When cleaning, add hot oil rolling cleaning agent into the container, turn on the circulating pump for circulation, and use it at normal temperature without heating. The components in the system can be cleaned. During the cleaning process, the valve can be switched every other period of time. The whole cleaning time should be kept at about 4 hours, and it should be switched every 1 hour as far as possible. Then open the part of the circulating pipeline for cleaning and check the cleaning condition.

After cleaning, drain the detergent and engine oil inside into the cleaning container. Some of them can be recycled. In this process, the solution inside can be dried by natural air drying. The whole cleaning process is completed.