Key points for attention in the operation of plate splicing machine

For a new jigsaw, there is basically no problem in using it, and there are few faults, except for the operation errors caused by the staff's failure to master the operation process. Today we want to talk about the points needing attention in the operation of the jigsaw.

Before using the panel splicing machine, check whether the air pressure and power supply are normal, whether the cylinder pulley above the press moves to both sides, and whether the proximity switch is in the start-up position. This is the formal start-up and operation. During operation, pay attention to whether the next cycle of each operation is still in the position of the start button. If it is not in the machine, it cannot operate normally.

The panel splicing machine also has an automatic operation process. In case of sudden power failure during the operation of the filter bag chain, it is necessary to turn off the power switch immediately and adjust to the original working point manually after the power supply returns to normal. If the staff needs to leave, they must turn off the machine and refuse to talk to others at work. The staff must understand the operation safety matters.