Correct usage of Shandong panel collator

Jigsaw is an efficient and energy-saving product. The quality of the boards produced is good. Our Shandong jigsaw manufacturer will teach you some correct methods of using the machine, hoping to help you.

1.In the production environment, it is better not to have salt, acid gas, corrosive gas, combustible gas and oil mist.

2.Try to reduce the temperature change inside the panel splicer caused by direct sunlight or thermal radiation, and cause mechanical aging.

3.The operating humidity of the panel splicer shall be in the range of 30% ~ 90%; the ambient temperature shall be in the range of 0-45 ℃, and the principle of temperature change shall not cause condensation

4.The internal part of the workshop using the panel splicing machine shall be covered sufficiently and shall not be eroded by rain and snow.

5.Dust absorbers shall be used in the operation room of the panel splicer, and the dust concentration shall not be greater than 10mg / m3, so as to reduce the risk

6.There shall be no conductive dust in the panel splicer workshop. Because the drop wood produced may cause unimaginable loss due to the generation of static electricity.

7.Inflammables should be avoided, the same as above, and unnecessary losses should not be caused.

Welcome to our factory to customize and purchase panel collator.