How to remove the trouble of the jigsaw

The role of jigsaw in wood products processing is very important, and the working time of general jigsaw is also very long. If there is a failure in the middle of the process, the production efficiency of the enterprise will be greatly affected, and the cost of professional repair and replacement of parts will also increase the operating cost. So I'd like to share with you some simple troubleshooting methods of the jigsaw machine, hoping to help you

Some failures will inevitably occur in the application of the equipment made by the collagenator manufacturer, such as the adhesion between the surface glue and foreign matters, too low air pressure, thick and warped plate, no flat plate edge treatment, and insufficient clamping force. How do we eliminate these problems?

When the above-mentioned faults occur in the splicing machine, the adhering impurities should be removed first, the table surface should be kept clean, the pipeline should be checked for air leakage, the air supply pressure should be adjusted, and then the plate edge should be treated well before assembling. Sometimes, the electrode plate discharge caused by short circuit or over-current should be found out first, and the common situation is that the glue overflows to the upper and lower plates or wood due to excessive glue application If the material has serious scar, the penetrating part shall be repaired with stainless steel electrode and then polished and leveled.

The manufacturer said that the improper use and adjustment of the products, and the mismatch of anode and grid current will also lead to the occurrence of relevant faults, which needs to be operated by professionals, and the high frequency must be readjusted after changing the thickness of the panel.

The above is about the puzzle simple troubleshooting, hope to help you, the site continues to update, if you want to learn more about the collage machine related information, welcome to collect this website, we will see you next week.