Under what conditions can the panel function be used to prolong the service life

If you want to extend the service life of the jigsaw, you should start with the details, determine the working conditions, and what state is more suitable for its operation. Next, you will see what conditions need to be met.

Extending the service life of the jigger starts from its humidity and temperature control. Under normal circumstances, its operating environment humidity is required to be within the range of 30%~90%; The ambient temperature shall be 0-45 ℃, and the temperature change shall meet the conditions that can not cause condensation. Because the working object of the jigger is the plate, there will certainly be dust in the work. The dust concentration shall not be higher than 10mg/m3. Therefore, professional dust removal equipment is required. It also starts from the aspect of environmental protection. When it comes to environmental protection, there is also a condition that the atmospheric environment is free of salt, acid gas and corrosive gas. I believe this can be avoided.

When installing the panel splicing machine, the environment should be protected from direct sunlight. The installation position should be away from the vibration source. Do not place inflammables and explosives around. There should be no conductive dust in the plant. This is for the sake of work safety. In the same way, it can prolong the service life of the panel splicing machine.