What if the jigger cannot be heated normally

There will be no abnormality when the jigger works normally. If it cannot be heated normally, it means that the work cannot be completed smoothly. It can be seen from the first glance, but it may not be so easy to solve.

To solve the problem that the panel splicing machine cannot be heated normally, first find out the cause, and check whether the power is not fully turned on. If it is not turned on, just wait. The heating material is not pure iron, so the heating rate can not meet the standard, and it is easy to catch cold, so it can not play the desired effect. Whether the resonance of accessories such as coils and equipment in the whole jigger can be matched, and the mismatching of accessories will certainly cause the problem of abnormal operation. It depends on which part has the problem.

A very important point during the inspection is that the inductance changes greatly after the workpiece is put in, and the resonance capacitor bank and transformer in the equipment can not cooperate. These are the reasons why the panel splicing machine can not be heated normally. It is much easier to solve these problems after finding out the reasons, and it can run normally after waiting for repair.