Analysis of the common small faults of the jigsaw

All supplies will not be used permanently, and there will be some small faults after a long time of use. If the problem is not big enough, we can simply repair it. If it is a big problem, we need to replace the accessories, and if it is more serious, we have to directly replace the equipment. Today, we will take a look at the daily troubleshooting of the jigsaw.

1. The problem of plate ignition is mainly caused by short circuit or over-current. If you know what causes it, it will be more convenient to solve it. First, check whether there is too much glue, and then check whether there are metal objects causing short circuit between the upper and lower plates. Then you can solve this problem.

2. This problem is mostly caused by improper operation. Therefore, it is necessary to carry out professional operation training for the staff after getting a piece of equipment, and then go to work after mastering the operation skills to avoid the occurrence of faults.

The above are two small problems often encountered in the use of the jigsaw. Problems are not terrible. Calm down and check the problems.